TurboChef Technologies i3 EN - Manual (Page 16)

8 MAINTENANCE
Step 3: Remove and Clean the Lower Jetplate
- unscrew the two thumb screws on the lower jetplate.
- Lift the lower jetplate by gripping the thumb screws.
- remove the lower jetplate.
- Wash, rinse, and sanitize the lower jetplate.
CAuTIoN: Do NoT remove the top ceramic jetplate or glass inserts; breakage
will result in a non-warranty service call.
Step 4: Remove and Clean the Lower Air Diverter
- remove the lower air diverter.
- Wash, rinse, and sanitize the lower air diverter.
WArNING: Do NoT discard the lower air diverter. The oven will not work
without the lower air diverter installed.
Step 5: Wipe the Oven Interior
- Wipe large particles from the oven interior with a damp towel.
Step 6: Clean the Oven Interior
- Spray oven cleaner onto the top, bottom, and sides of the oven interior.
CAuTIoN: Do NoT spray oven cleaner into the holes on the back
oven wall. Doing so can damage critical oven components, resulting in a
non-warranty service call.
- Allow oven Cleaner to penetrate stains for five minutes.
- Clean the oven interior with a nylon scrub pad.
NoTE: The i5 oven top jetplate (Figure Step 6.2) is ceramic. The i3 oven top
jetplate is either ceramic or metal with glass inserts.
CAuTIoN: Do NoT apply pressure to the ceramic or glass portion of the top
jetplate when wiping; breakage will result in a non-warranty service call.
CAuTIoN: Do NoT remove the top ceramic jetplate or glass inserts; breakage
will result in a non-warranty service call.
Step 7: Clean and Dry the Oven Door
CAuTIoN: Do NoT spray oven cleaner directly onto the oven door gasket
(Figure Step 7) or saturate it with water.
CAuTIoN: Do NoT scrub or attempt to clean the oven door gasket (Figure
Step 7). Doing so may cause the oven door to misalign, resulting in a non-
warranty service call.
- Clean the oven door with oven cleaner and a nylon scrub pad.
- Wipe the oven door with a damp towel.
Step 8: Rinse the Oven Interior
CAuTIoN: Do NoT use a hose or water jet for cleaning. Doing so can
damage critical oven components, resulting in a non-warranty service call.
- rinse the oven interior with clean water.
- Dry the oven interior with a clean towel.
Step 3
Step 4
Step 5
Step 6.1
Gasket
Step 7
Step 8
Step 6.2
Top Jetplate