Alto-Shaam FRYTECH ASF-60G series - Manual (Page 31)

CONTROL PROGRAMMING OVERVIEW
Initial access to the programming mode must start with the control in the OFF
position.
Entering the “PROGRAM” mode provides the operator with the ability to modify all control
functions and provides access to the boil-out “BOIL” feature.
The fryer programming capability offers the following functions and features. Some of these operating parameters have
been preset at the factory and are described in the control programming section:
Press and hold the “PROGRAM” key for a period of 5 to 10 seconds.
“Boil”
“Set-Point”
“Product”
“Basket Lift”
“LiftSync”
“Temp F-C”
“Language”
“TempDisp”
“AlarmSet”
“IdleMode”
“Filter”
“Filter Cnt”
“Max Time”
“Hi Temp”
“Lo Band”
“Hi Band”
“Melt Ct”
“Preheat Band”
The LEFT  arrow key will
escape from the program
entered and will turn the
control
“
off . ”
The UP  and DOWN 
a r r o w k e y s p r o v i d e t h e
ability to scroll through all
available control programs.
The RIGHT 4 arrow key
selects the program for the
item displayed and confirms
any changes made.
To exit the control programming mode at any time, press and hold t he LEFT

arrow key .
OFF
Gas Fryer Operation & Care Manual • 29
D E L U X E C O N T R O L O P E R A T I O N