Alto-Shaam FRYTECH ASF-60G series - Manual (Page 37)

Gas Fryer Operation & Care Manual • 35
D E L U X E C O N T R O L O P E R A T I O N
PROGRAMMING THE CONTROL
“Product”
“ShakTime” The “ShakTime” sub-menu provides the operator with a programmed time period
during which the baskets will automatically lift to half the normal raised position so
that the operator can shake each basket. When programmed into a product procedure,
an alarm will sound to alert the operator at the start of the “ShakTime” cycle and
will continue until the activated product key is pressed. The amount of “ShakTime”
can only be programmed up to the maximum amount of frying time allotted to the
programmed product.
There is no “ShakTime” programmed into any of the products shown on the product
chart. The control provides shake time adjustment from “OFF” up to a period of
60 minutes. When received from the factory, shake-time will indicate “OFF” in the
display for all programmed preset items.
Press the right 4 arrow key to enter the “ShakTime” sub-menu. Display stops flashing.
Press the Up  or Down  arrow keys to change the setting. When the desired
amount of “ShakTime” appears, press the right 4 arrow key to confirm the setting.
If no shake time is required, press the Down  arrow key and scroll until “OFF”
appears in the display. When the correct setting appears, press the right 4 arrow
key to confirm. Display flashes. Press the down  arrow key to advance the control
to the next sub-menu setting.
O F F
ShakTime
Product
To exit the control programming mode at any time, press and hold t he LEFT

arrow key .