Alto-Shaam FRYTECH ASF-60G series - Manual (Page 34)

PROGRAMMING THE CONTROL
“Product”
The fryer control has been preset at the factory with four product menu items and two programmable
spaces in the dual control.
The number of available product keys is directly linked to the “LiftSync” program that provides
the ability to raise both baskets simultaneously or independently. If “LiftSync” is set in the
“ON”
position to raise both baskets at the same time, the “Product” function provides six
available product keys for programming. If “LiftSync” is set to the “OFF” position to raise each
basket independently, the “Product” control feature provides twelve available product keys for
programming, six on each side of the control. When received from the factory “LiftSync” is set
in the “OFF” position for independent basket operation.
NOTE: If “LiftSync” is to remain in the “OFF” position to provide independent basket operation
for the purpose of frying two individual products simultaneously, the cooking temperature
for each product must be the same. The fryer will use the higher temperature menu item.
The “Product” feature provides the operator with the ability to modify all presets and/or program
additional product menu items as required.
Press the Up  or Down  arrow keys to scroll until “Product” appears in the display.
“Item”
The sub-menu provides the operator with the ability to rename an existing
programmed product or add a program to one of the blank program keys, i.e.,
Product a
or
Product b
.
CONTINUED
1. Fries 2. Nuggets 3. Fish 4. Chicken 5.
Product a
6.
Product b
Product A
Product
Gas Fryer Operation & Care Manual • 32
D E L U X E C O N T R O L O P E R A T I O N