Alto-Shaam FRYTECH ASF-60G series - Manual (Page 35)

PROGRAMMING THE CONTROL
“Product”
“Item”
Press and hold any one of the twelve product keys to be programmed or modifi ed.
The product, as currently named, will begin to flash in the display.
Press the Right 4 arrow key. The first letter of the product name will begin to flash. Press
the Up  or Down  arrow keys to scroll until the first letter changes as required
(
upper case
,
lower case
,
numBers
,
or Blank space is aVailaBle through the scrolling
process
). Press the Right 4 arrow key. The second letter of the product name will
begin to flash. Press the Up  or Down  arrow keys to scroll until the second letter
is changed as required. Continue this process until the desired name appears. NOTE:
There are 8 spaces available for the product name. ALL 8 spaces must be filled
with a letter, number or blank space to complete the setting.
When the correct name is displayed, press the Left 4 arrow key to confirm the selection. The
named product will start flashing. Display flashes. Press the Up  or Down 
arrow key to advance the control to the next setting option for this product as
directed on the following pages:
Entry into the Product programming mode allows the operator to program all available
product keys. To continue programming additional items, press and hold the next
product key
to be programmed and follow the above instructions.
After the final “Product” key has been programmed, the LEFT  arrow key must be pressed to
completely exit the control programming mode. The control will revert to the “OFF”
position. To program control features other than PRODUCT, press and hold the
“PROGRAM”
key for a period of 5 to 10 seconds from the “OFF” position.
Press the Up  or Down  arrow keys and scroll to the program function to be set.
Product
Time Mod Cook Time SetPoint ShakeTime Hold Time
Off
Gas Fryer Operation & Care Manual • 33
D E L U X E C O N T R O L O P E R A T I O N