Audio-Technica AEW-T1000A - Manual (Page 13)

Artist Elite ® 4000 & 5000 Series Professional UHF Wireless Systems
13
Changing receiver settings
Touch: A momentary press of the Mode/Set button. It is used
to enter Menu mode, to enter Edit mode, or to Escape
without making any changes to current settings.
Hold: A press and hold (about two seconds) of the Mode/
Set button. It is used to accept a new setting when
the receiver is in Edit mode or to save the current
settings to one of the five user-defined name
presets or the internal memory location (“NAME?”).
Enter Menu mode
With the receiver in the normal operating mode, touch the Mode/Set
button. The top line of the receiver display shows “FRQ” preceded
by one, two, or three asterisks.
Touch the Up/Down arrow buttons to scroll through the available
functions that may be changed. (See the chart on page 15 for a list
of functions and display indication.)
Note that the display’s lower line
indicates the current setting for a given function.
Enter Edit mode
When the function to be edited is displayed, touch the Mode/Set
button. The small word “EDIT” flashes in the bottom of the display,
indicating Edit mode.
Touch the Up/Down arrow buttons to scroll through the available
choices for the function, stopping on the desired choice.
Hold the Mode/Set button to accept the new choice. “STORED”
appears in the display when the choice is accepted. The receiver
then reverts to Menu mode.
Continue this process until all desired function-setting changes are
complete.
Note: To escape from Edit mode without making any changes, touch
the Mode/Set button. “ESCAPE” appears briefly in the display, and
the receiver reverts to Menu mode.
Quitting and saving changes
The receiver has several methods of saving function settings. Each
receiver has five loadable user presets that may be given individual
names (up to six characters), along with a special, non-loadable
memory location called “NAME?” that can store the most recent
settings until they are changed.
To save a set of receiver function settings, use the Up/Down arrow
buttons to scroll until the display shows “QUIT.” The procedure for
saving the current settings depends upon the desired location:
Saving to the “NAME?” location
If the current receiver settings do not need to be identified with a
name, the special “NAME?” location may be used to store them. As
with the “last number redial” function on a telephone, these settings
remain stored in the receiver even if power is turned off. They
disappear only if one of the settings is modified.
To store settings in the “NAME?” location, touch the Mode/Set
button. The display shows “NAME?” for the receiver name.
Saving updated settings to the currently loaded user
“PRESET#” location
To update the receiver settings in the currently loaded user preset
that is already named, hold the Mode/Set button. The display shows
“STORE XXXXXX” (where XXXXXX indicates the preset’s name).
Hold the Mode/Set button a second time. The first character of the
name flashes.
Hold the Mode/Set button a third time. The display briefly shows
“STORED”, and the receiver reverts to normal operation.
Saving to a different user PRESET# location
To store settings to a different user preset location, hold the Mode/
Set button. The receiver shows “STORE XXXXXX” (where XXXXXX
indicates the loaded preset’s name).
Touch the Up/Down buttons to scroll to another preset location
(the display shows the user-defined name for each location, or
“PRESET#” if no name has been assigned).
At the desired preset location, hold the Mode/Set button. The first
character of the name becomes the cursor and flashes.
Touch the Up/Down arrow buttons to scroll through the characters
until the desired character is displayed. Touch the Mode/Set button
to accept the character and advance to the next character. To
advance the cursor without changing the character, touch the Mode/
Set button.
After setting the last character, hold the Mode/Set button to store the
name and revert to normal operation. Holding the Mode/Set button at
any time during the naming process while the cursor is flashing will
store the setting and return the receiver to normal operation.
Note: To escape the naming process, touch the Mode/Set button
repeatedly until the last character is flashing, and then touch the
Mode/Set button again to escape. At the flashing “ESCAPE” display,
touch the Mode/Set button to go back to the beginning of the name,
or hold the Mode/Set button to return to “QUIT.”
Note: While the receiver is in Edit mode, no action (no buttons
pressed) for approximately 30 seconds causes the receiver to revert
to Menu mode.
While the receiver is in Menu mode, no action for approximately 30
seconds causes the receiver to revert to normal operating mode. Any
setting changes stored will remain in the “NAME?” memory location,
and the receiver will display “NAME?” because the settings were
not saved to a user preset. This will occur even if a user preset was
previously loaded.