Audio-Technica AEW-T1000A - Manual (Page 19)

Artist Elite ® 4000 & 5000 Series Professional UHF Wireless Systems
19
Preset/Default Settings
A “PRESET” selection in the menu permits the storing of up to five
different user-definable configurations. Customized names, using
letters, numbers and symbols, can also be created and stored for
Presets 1–5. In addition, a Default (“DEF”) choice permits returning
all transmitter functions to their factory-default settings.
To store Preset configurations:
1. Touch the Set button once to move to Menu mode.
2. Touch the Up arrow twice to move to “PRESET” in the
LCD window.
3. Touch the Set button once and “LOAD” (or “STORE”) will appear
in the LCD.
4. Touch the Up or Down arrow once, if needed, to change the
selection to “STORE.”
5. Hold the Set button until “STORE” changes to “PRSET1” (or the
name of the currently loaded Preset).
6. If desired, touch the Up or Down arrow to cycle through the
available choices: “PRSET1” through “PRSET5” (or their
previously changed names).
7. Accept or enter a name for the Preset:
a. To accept the standard name (PRSET1 – PRSET5, or the
previously stored name) for a new Preset configuration and to
update (overwrite) any previously stored configuration choices:
a1. At the desired Preset, hold the Set button until the first
character blinks.
a2. Hold the Set button again until “STORED” appears in the
window. This stores the standard Preset name with the
associated function choices and returns the transmitter to
normal operation.
b. To enter a custom name for a Preset:
b1. At the desired Preset, hold the Set button until the first
character blinks.
b2. Using the Up or Down arrow, move through the available
characters (see box below) until the desired character is
reached. Touch an arrow button for single steps, or hold it
down to scroll through the characters at increasing speed.
b3. Touch the Set button once to accept the first character
and move to the second character, which now is blinking.
Use an Up/Down arrow to find the desired second
character; touch the Set button once to accept it and move
to the third position. Repeat this selection process until the
character for the sixth position has been selected. (It is not
necessary to change or step through all six characters
before storing the result. At any point in the process,
simply hold the Set button until “STORED” appears in
the window.)
b4. Once the sixth character has been selected as desired, hold
the Set button until “STORED” appears in the window.
This stores the custom Name with the associated function
choices and returns the transmitter to normal operation.
Note: If a correction or change is desired while entering characters,
simply touch the Set button once when the sixth (last) character has
been reached. The window will flash “ESCAPE.” Touching the Set
button once more will start the name-entry process over at the first
character. (To leave any characters as they are, simply touch the Set
button once to skip over them.)
Available transmitter Name character choices (listed in the Up-arrow
direction):
A …through… Z,
__ (underscore) … (space),
[ (left bracket) … ] (right bracket),
* … + … -- … /,
0 …through… 9,
| … < … > … ?
To load (recall) a Preset:
1. Touch the Set button once to move to Menu mode. (The window
changes to frequency, if Name had been displayed.)
2. Touch the Up arrow twice to move to “PRESET” in the LCD
window.
3. Touch the Set button once. “LOAD” (or “STORE”) appears in
the LCD.
4. If needed, touch the Up or Down arrow once, to change the
selection to “LOAD.”
5. Hold the Set button until “LOAD xxxxxx” (the current Preset)
appears in the LCD.
6. Touch the Up or Down arrow to change the selection from
“xxxxxx” to the desired Preset.
7. Hold the Set button until “LOADED” appears briefly in the
LCD. The transmitter reverts to normal operation with the
selected preset’s settings loaded. To toggle between transmitter
name and frequency, touch an Up or Down arrow button.
To revert to factory-default values:
1. Touch the Set button once to move to Menu mode.
2. Touch the Up arrow twice. “PRESET” shows in the LCD window.
3. Touch the Set button once. “LOAD” (or “STORE”) appears in
the LCD.
4. Touch the Up or Down arrow once, if needed, to change the
selection to “LOAD.”
5. Hold the Set button. The current Preset appears in the LCD.
6. Touch the Up or Down arrow buttons to cycle through the
available choices until “DEF” appears in the display.
7. Hold the Set button to load the factory default settings.
“LOADED” appears briefly in the LCD. The transmitter reverts to
normal operation at the default settings.
Note: Loading the default settings resets the transmitter frequency
to the lowest frequency in the band.