Beijer Electronics QTERM®-A12 - Manual (Page 25)

QTERM-A12 Terminal 19
C HAPTER 6
S PECIFICATIONS
DISPLAY
Color
TFT color SVGA LCD display
65,536 colors
Size
308 mm (12.1") diagonal
246 mm x 184.5 mm active area
Pixels 800 x 600 (SVGA)
Dot pitch 0.3075 x 0.3075 mm
Lighting
LED
Brightness is software controllable
Backlight brightness 450 nits typical
Contrast ratio 700:1 (minimum)
TOUCH SCREEN
Analog-resistive operation
5-wire construction
Anti-glare surface treatment with 3H hardness
INTERFACE
Primary serial port
User-configurable EIA-232, EIA-422 or EIA-485 interface with
selectable 485 AC terminations and fail-safe network
Secondary serial port EIA-232 serial port with hardware or software flow control
Ethernet 10/100Base-T wired Ethernet with optional PoE
USB host Two USB 2.0 full-speed host ports
Power connector
3-pin, 5.0 mm pitch terminal strip. (Phoenix Contact MSTBVA
2,5/3-G – 1755529)
AUDIO
Speaker 0.7 W 8 ohm speaker on back of unit