Beijer Electronics QTERM®-A12 - Manual (Page 36)

Connector Pinouts Mechanical
30 QTERM-A12 Terminal
7.2.4 Ethernet Port
The Ethernet port has a standard 10/100Base-T interface with an 8-pin (RJ-45) modular jack
connector. The connector orientation and pinout table are shown below. For PoE pinout infor-
mation please refer to
section 3.4, “Optional Power-over-Ethernet Interface” .
C AUTION
For Class I, Division 2 installations:
Do not connect or disconnect cables while power is applied unless the area is known to be
non-hazardous.
Pinout Table
1 TX+
Figure 16
RJ-45 Connector
2 TX-
3 RX+
4 —
5 —
6 RX-
7 —
8 —