Beijer Electronics NA-9379 - Manual (Page 17)

17
MODBUS Programmable I/O NA-9379 FnIO S-Series
Copyright(C) CREVIS Co.,Ltd Support +82-31-899-4599 URL : www.crevis.co.kr
3.3. RJ-45 Socket , RS232/485 Port
3.4. Toggle Switch , Push Button
RJ-45 Signal Name Description
1 TD+ Transmit +
2 TD- Transmit -
3 RD+ Receive +
4 -
5 -
6 RD- Receive -
7 -
8 -
Case Shield
RS 232/485 Signal Name Description
1 -
2 RXD RS232 RXD
3 TXD RS232 TXD
4 -
5 GND RS232 GND
6 D+ RS 485 D+
7 -
8 D- RS485 D-
9 -
Toggle Switch Status Module is Description
UP RUN PLC Run
DOWN STOP
PLC Stop
(Fault Action is performed)
Push Button Module is Description
Press and release. Reset Reset the PLC and then stop.
Hold down and reset
the power.
IAP mode
Available for firmware download
using FireFox