Memory reset, Fnio s-series – Beijer Electronics NA-9379 User Manual
Page 34
Advertising
34
MODBUS Programmable I/O NA-9379
FnIO S-Series
Copyright(C) CREVIS Co.,Ltd Support +82-31-899-4599 URL : www.crevis.co.kr
5.6. Memory Reset
data field 0x55AA makes the remote device to restart with factory default setup of EEPROM.
*All expansion slot configuration parameters are cleared.
(1) Run ‘[Crevis] -> [IOGuidePro] -> [Protocol Messenger] -> [Modbus]’
(2) Write the value of each.
*Protocol : Modbus RTU
*ComPort : User Port / Baudrate : 38400(default)
*Address(Hex)
: 0001 (Factory default setup)
*Function(Dec) : When the value is write – 08, Diagnostics
(3) Write the register value and click the ‘Send’ button.
*Value : 0x55AA
Advertising