Beijer Electronics NA-9379 - Manual (Page 29)

29
MODBUS Programmable I/O NA-9379 FnIO S-Series
Copyright(C) CREVIS Co.,Ltd Support +82-31-899-4599 URL : www.crevis.co.kr
5.4. Setup IP Address
You can assign the IP Address manually via the setting of Bootp server.
Default IP Address is 192.168.100.100
(1) Run ‘[Crevis]  [IOGuidePro]  [Bootp Server]’
NA9379 is a model that supports DHCP and Bootp.
If you have a DHCP server on the same communications,
IP settings from Bootp is impossible.
In this case, set the IP from the DHCP server.