Aga Ranges 6-4 Series - Manual (Page 26)

TO FIT PAN SUPPORTS
Fit the pan supports in the following order. The pan supports are marked on the underside to
correspond to the markings below. The pan supports must locate in the recesses in the hotplate
casting.
Important
It is very important for the performance and reliability of the hob that the pan supports are fitted
in accordance with the AGA SIX-FOUR SERIES - DC6 OWNERS MANUAL.
To help identify the correct location of the pan supports, the centre rear pan support has been
uniquely designed with tag, as shown. This pan support must be fitted in the rear centre position
with the tag pointing towards the back of the appliance.
Fig. 13A DESN 513712 A
Fig. 13B DESN 512995 A
26