Aga Ranges 6-4 Series - Manual (Page 40)

The minute timer works separately from the time of day clock and can be set to time periods from
1 minute to 23.59 hours. Only a one handed operation is required.
SETTING THE MINUTE TIMER
1. Press the MINUTE TIMER button the bell symbol and 0.00 will be displayed. Set the
required time by using the plus + and minus - buttons.
2. After 5 seconds the display will go back to showing the time of day, the bell symbol will
remain steady and the set time will immediately start to count down. By pressing the
MINUTE TIMER
button, the display shows the time remaining.
3. At the end of the set time, a beep will sound, the bell symbol will flash and continue for 2
minutes unless cancelled by pressing the MINUTE TIMER button or MANUAL
button.
4. The setting can be cancelled by pressing the MINUTE TIMER and minus - button and
running the time back to 0.00.
40
THE MINUTE TIMER
DESN 512657 FIG. 15