Pathway LR Manual - Manual (Page 21)

DMXPathfinder LR DMXPathfinder Operations
20
It is unnecessary to enter any universe information under the Show Specific tab
unless the requirements of, say, a touring show requires different values to be
used. When that show moves out, be sure to use the Delete button to erase all
information contained in the Show Specific tab so that the Default values will be
used again. Remember that Show Specific values take precedence over
Default values.
When back in the main working screen, select a Connected or Non-
Connected Station by clicking once on it. Then enter 1234 in the Device # box
in the Station Detail pane at the top of the screen. Notice that the Address box
now displays 210, and the Universe box shows 3. What good are these
figures? Let's say you have a color scroller that you want your console to control
on channel #1234. How do you set the scroller's address switches when they
have a maximum allowable range of 1 to 512? DMXQConnect has saved you
the trouble of using mental math or carrying a calculator to figure out the real
address for the scroller, and which console port it will connect to.
S OURCE C ONFIGURATION
Next we will assign working names to the various DMX sources (control console
outputs) using the Configure, Source window and table. Access it from the
main menu now.
To modify a Source, click on it in the Source table to highlight it, then click on the
Source name or Description box (whichever you wish to modify). The regular