j5 create JUA210 - USB 2.0 VGA Display Adapter - Manual (Page 11)

10
INSTALLATION FOR WINDOWS 7/Vista
Device Driver Installation
This section illustrates the procedure for device driver installation for
Windows 7. To start, insert the Driver CD into your computer’s CD-ROM drive.
The setup program should be launched automatically. If Autorun does not
begin, go to “Computer”, Click on your optical drive, and manually run the
setup CD by double-clicking on “Setup.exe”
※Please make sure the USB cable of USB Display Adapter is unplugged
from your PC or Notebook before executing the installation program.
1. The installation page will be launched. To start click on “ Install the Latest
Driver”. Please make sure the network is available or press “Install Driver”
to start the installation
2. After pressing the installation option, the InstallShield Wizard will launch,
click Next> to continue