j5 create JUA210 - USB 2.0 VGA Display Adapter - Manual (Page 26)

USB DISPLAY ADAPTER
USER MANUAL
25
Multi-USB Display Adapter Installation
For installation of multiple USB Display Adapters, during the “Install Shield
Wizard complete” step, select “No, I will restart my computer later.” and
click Finish to continue next step below
A. Connect all external display devices (monitor/ projector) to the
VGA/DVI connector of USB Display Adapters and switch power on.
B. Connect the USB Display Adapter into available USB 2.0 port of PC
or Notebook.
After Inserting an USB Display Adapter into a USB 2.0 port, the systems
will automatically start the installation procedure and the prompt
message will pop-up on the task bar.