j5 create JUA210 - USB 2.0 VGA Display Adapter - Manual (Page 33)

32
INSTALLATION FOR MAC
Device Driver Installation
Installing the device driver enables your computer’s operating system to
recognize the USB Display Adapter. Be sure that you are referring to the
appropriate installation procedure before you begin installing.
※ Make sure the USB cable of USB Display Adapter is unplugged from your
Mac Desktop or Mac Notebook before executing the setup program.
This section illustrates the device driver installation procedure for a
computer running Snow Leopard.
1. Insert the Driver CD into the CD-ROM drive
2. The installation page will be launched; To begin installation click on start
“ Get Last Driver online” , please make sure the networking is available
or Choose the OS version you are using and press “Install Driver” to
start the installation