j5 create JUA210 - USB 2.0 VGA Display Adapter - Manual (Page 25)

24
6. After your computer is rebooted, connect the external display device
(monitor/ projector) to the VGA/DVI connector of USB Display Adapters
and turn it on.
7. Connect the USB Display Adapter into an available USB 2.0 port of a PC
or Notebook, After Inserting the USB Display Adapter into an USB 2.0 port,
the “Installing device driver software” message will pop up.
An icon ( ) will be seen on the lower right toolbar.
The message pictures below shows Driver software is installed successfully.
If you’re not going to install another USB Display Adapter, restart your PC.
The functions of the USB Display Adapter will be activated after the
computer restarted.