Axis Communications Video Server AXIS 241SA - Manual (Page 33)

33 AXIS 241QA/AXIS 241SA - Pan Tilt Zoom
PTZ configuration
Once PTZ has been installed for the AXIS 241QA/AXIS 241SA, PTZ Configuration now
appears in the menu to the left with the following sub menus.
Preset positions
A preset position is a pre-defined camera view than can be used to quickly move the
camera to a specific location.
From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera
to the required position. When satisfied with the camera's position, enter a descriptive
name. The camera position, iris and focus settings are then saved as a preset position.
The position can be assumed at any time, by selecting the preset's name from the Preset
positions drop-down list. Preset positions can be selected in Live View, from events and in
Sequence mode.
One position can be set as the Home position, which is readily accessible by clicking the
box beside Use current position as Home. The position's name will then have (H) added to
the end, such as Office Entrance (H).