Axis Communications Video Server AXIS 241SA - Manual (Page 36)

36 AXIS 241QA/AXIS 241SA - Pan Tilt Zoom
Preset positions
Also available with many PTZ devices are Preset positions. These presets are selected from
the drop-down Source list on the Live View page and will move and/or zoom the camera
to a pre-defined position, that is to cover an area of particular interest. Events can also be
configured to go to preset positions when triggered. For information on setting up preset
positions, please see Preset positions, on page 33 and the online help.
G uard tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined
order or at random, and for configurable time periods. Unlike the Sequence Mode, which is
a viewing application under Live View Config (see Live View Config, on page 27), the
guard tour sequence runs after the user has logged off or closed the browser.
Advanced
Device - The Device Settings window is for driver specific settings. The appearance of this
window can vary depending on the driver installed. Options that can be configured
include: Driver Specific Settings for Video Source 1, Mechanical Limits for Moving
Video Source 1, Light Control for Video Source 1, and Extended Driver Specific Settings
for Video Source 1.
Controls - The Control settings window contains tools for creating and saving short
command buttons that are located under the Control panel. These buttons provide direct
access to various built-in auxiliary commands provided by the PTZ driver and are
displayed in the PTZ Panel.