A&D TM-2430-13 - Manual (Page 13)

12
To specify the BP Mode while viewing an opened data file, complete these steps:
Step 1 Select the BP Mode box on the toolbar.
Step 2 Select the desired BP Mode used to view and analyze the opened data file.
Figure 5: BP Mode selection on toolbar
To set a default BP Mode for the software at startup, see “2-9-4 Default Settings”.
Note: The BP Mode for printed reports is assigned separately in the Report Format
Setup. See “2-8 Report Menu”.
2-5 File Menu
The File menu is used to manage the files stored on a hard drive or floppy disk. It may also be used
to exit the software. The File menu has the following sub-menus:
Menu Description
Open This function is used to select a data file for viewing, modifying or
printing a report. After a file has been opened, the file name, patient
name and date of the monitoring session are displayed in the title bar
of the main screen
Save As This function is used to copy a selected file to a new file with a
different name.
Delete This function is used to delete a selected file.
Convert This function is used to convert the blood pressure measurement
data of a data file to a format which is readable by most spreadsheet
applications. The converted file will have the same name as the data
file with a .CSV file extension.
Merge the BP data files This function is used to merge multiple data files into one file.
Print This function is used to print reports for one or more data files
according to a user-selectable report format.
Exit This selection is used to exit the software.