A&D TM-2430-13 - Manual (Page 41)

40
2-7-3-4 UA-767PC Setup
When the UA-767PC connected to a personal computer, times to generate a beeping sound can be
set.
To set the times, complete the following steps:
Step 1 Select the Recorder menu.
Step 2 Select the Setup sub-menu. The Recorder Setup dialog box appears.
Figure 26: UA-767PC Recorder-Setup dialog box
Step 3 Enter times to generate a beeping sound.
Note: The same time can not be entered in different boxes. Enter different times for
each box.
Step 4 Click the OK button to confirm the settings. If the settings are not correct, reset them
or go to Step 5.
Step 5 To cancel the settings and close the dialog box, click the Cancel button.
2-7-4 Blood Pressure Measurement (Available only with the UA-767PC)
When the UA-767PC connected to a personal computer, blood pressure measurement can be
started from the computer.
Step 1 Select the Recorder menu.
Step 2 Select the Blood Pressure Measurement sub-menu.
Step 3 Blood pressure measurement will be started.