A&D TM-2430-13 - Manual (Page 34)

33
Step 7 Click the OK button.
Note: To view a retrieved file, you must open it.
2-7-2 Clearing The Monitor’s Memory
The monitor’s memory should be cleared before each monitoring session. With the monitor and the
processor connected to the computer, you may clear the measurement data stored in the monitor by
completing the steps below:
Step 1 Select the Recorder menu.
Step 2 Select the Clear Data sub-menu.
Figure 20: Recorder - Clear Data dialog box
Step 3 To clear the monitor's memory, click the OK button.
Step 4 To not clear the monitor's memory, click the Cancel button.
CAUTION: Cleared data cannot be recovered.