Installation procedure – Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch User Manual
Page 11
Advertising
© MuxLab Inc.
Audio 8x8 Matrix Switch Installation Guide
Page 11
3.5.
Installation Procedure
In order to install the Audio 8x8 Matrix Switch, please follow the steps below:
1. Place the Matrix Switch in its final location (see Section 3.4 Physical Installation).
2. Ensure that power is OFF on all sources and outputs.
3. Connect all sources and outputs to the Matrix Switch.
4. Connect the external 12 VDC power supply to the Matrix Switch and plug the
power supply into an AC power outlet.
5. Power up all equipment.
6. Figures 6 and 7 show some typical configurations.
The Matrix Switch is now ready to use. See Section 3.7 Manual Control for
instructions on usage.
Advertising