Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch - Manual (Page 17)

© MuxLab Inc. Audio 8x8 Matrix Switch Installation Guide
Page 17
3.10. USB Driver Setup
When interfacing a MuxLab device with the USB port on Windows XP, Windows 7,
or Windows 8 operating systems, a driver setup file will be required. For Linux and
Mac OS X operating systems, no driver is necessary.
To install the USB serial driver, download the SC-000032-A USB to serial driver file
from the MuxLab website and save it to the local hard drive. NOTE: If the
downloaded file is compressed, it will have to be uncompressed before using it.
Plug the USB cable between the device and the PC, and power up the device. The
Found New Hardware wizard will open (Figure 13). Select Locate and install
driver software (recommended).
Figure 13: Found New Hardware Wizard