Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch - Manual (Page 15)

© MuxLab Inc. Audio 8x8 Matrix Switch Installation Guide
Page 15
3.8. Cascadability
Two Audio 8x8 Matrix Switches can be cascaded using the expansion port (Figure 9)
on the back panel of each unit. To cascade two units, one unit must be configured as
the master and the other as the slave, which is done via the internal jumper P4 pin 1-2.
Figure 9: Expansion Port (Back Panel)
Figures 10 and 11 illustrate two possible configurations for cascading two Audio 8x8
Matrix Switches.
Figure 10: Cascade Configuration 8x16
Figure 11: Cascade Configuration 16x16