Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch - Manual (Page 35)

© MuxLab Inc. Audio 8x8 Matrix Switch Installation Guide
Page 35
6. Name (Continued)
name -o
Description: Get a list of all the output port names
Arguments: <none>
Example: Get list of all output port names
name -o
Response: Output Names:[“Output 1”,“Output 2”,“Output 3”,“Kitchen TV”]
(or an error message if the command failed)
name -preset <preset #> “<name>”
Description: Set a name for the selected preset number
Arguments: <preset #>: 1 to 8
<name>: up to 20 characters
Example: Set name “Week-end” for preset 7
name -preset 7 “Week-end”
Response: Preset Names:[“Preset 1”,“Preset 2”,“Preset 3”,“Preset 4”,“Preset 5”,
“Preset 6”,“Week-end”,“Preset 8”]
(or an error message if the command failed)
name -preset
Description: Get a list of all the preset names
Arguments: <none>
Example: Get list of all preset names
name -preset
Response: Preset Names:[“Preset 1”,“Preset 2”, “Preset 3”,“Preset 4”,“Preset 5”,
“Preset 6”,“Week-end”,“Preset 8”]
(or an error message if the command failed)
name -unit “<name>”
Description: Set a name for the unit
Arguments: < name>: up to 20 characters
Example: Set the name “MuxLab Switch” for the unit
name -unit “MuxLab Switch”
Response: Unit Name:[“MuxLab Switch”]
(or an error message if the command failed)
name -unit
Description: Get the unit name
Arguments: <none>
Example: Get the unit name
name -unit
Response: Unit Name:[“MuxLab Switch”]
(or an error message if the command failed)