Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch - Manual (Page 23)

© MuxLab Inc. Audio 8x8 Matrix Switch Installation Guide
Page 23
(2) Setup
The Setup submenu (Figure 21) is used to perform the following tasks:
• Modify port names
• Modify present names
• Modify network connections and passwords
• Modify RS232 connections
• Modify alarm settings
• Upgrade firmware
Figure 21: Setup Submenu – Port Names Tab
In the Port Names tab, the user can modify port names in the Display Names and
Source Names columns, and then click on Save to save these modifications. The user
can also modify the name of the entire device by changing the text that appears in the
Unit Name box and clicking on Save.
The length of all names is limited to 20 characters each.