BrandTech Scientific Transferpette S - Manual (Page 44)

A
B
C
D E
Parts will differ slightly depending on nominal
volume of instrument. (Fig. shows spare parts
for Transferpette
® S 20-200 µl)
Upper part
of ejector
Piston
unit
Seal with
spring
Shaft with
ejector spring
Lower part
of ejector
Transferpette ® S, fixed volume
Transferpette ® S, adjustable volume
Spare Parts
Transferpette ® S up to 1000 µl
Capacity A B C D E
10 µl 7055 10 7046 01 – 7046 21* 7046 38
20 µl 7055 10 7046 02 7046 10 7046 22 7046 39
25 µl 7055 10 7046 08 7046 14 7046 22 7046 40
50 µl 7055 10 7046 03 7046 11 7046 23 7046 41
100 µl 7055 10 7046 03 7046 11 7046 23 7046 42
200 µl 7055 10 7046 04 7046 12 7046 24 7046 43
500 µl 7055 10 7046 05 7046 13 7046 25 7046 44
1000 µl 7055 10 7046 05 7046 13 7046 25 7046 45
* The seal is permanently built into the shaft – it cannot be removed.
Capacity A B C D E
0.1 - 1 µl 7055 10 7046 00 – 7046 20* 7046 30
0.1 - 2.5 µl 7055 10 7046 16 – 7046 18* 7046 49
0.5 - 10 µl 7055 10 7046 01 – 7046 21* 7046 31
2 - 20 µl 7055 10 7046 02 7046 10 7046 22 7046 32
10 - 100 µl 7055 10 7046 03 7046 11 7046 23 7046 33
20 - 200 µl 7055 10 7046 04 7046 12 7046 24 7046 34
100 - 1000 µl 7055 10 7046 05 7046 13 7046 25 7046 35
* 0.1-1 µl / 0.1 - 2.5 µl / 0.5-10 µl including seal
44