Kramer Electronics VP-725N - Manual (Page 2)

Contents i
Contents
1 Connecting to the Kramer Device via the Ethernet Port 1
1.1 Connecting the Ethernet Port Directly to a PC (Crossover Cable) 1
1.2 Connecting via a Straight-through Cable 3
2 Installing and Running the DeviceInstaller™ Configuration Software 4
2.1 Installing DeviceInstaller™ 4
2.2 Running DeviceInstaller™ 4
2.3 Assigning an IP Address 5
2.4 Configuring the Ethernet Port Using DeviceInstaller™ 9
2.5 Configuring the Ethernet Port Using the Web Manager Page 10
3 Installing and Configuring Com Port Redirector Software 16
3.1 Installing the Com Port Redirector Software 17
3.2 Configuring the Com Port Redirector 20
Figures
Figure 1: Local Area Connection Properties Window 2
Figure 2: Internet Protocol (TCP/IP) Properties Window 2
Figure 3: DeviceInstaller Main Dialog Box 5
Figure 4: Device Details 5
Figure 5: Selecting the Assignment Method 6
Figure 6: Fill in IP Settings 6
Figure 7: Address Unreachable Window 7
Figure 8: Assign IP Address 7
Figure 9: IP Address Assignment Process 8
Figure 10: Ping Device Window 8
Figure 11: Ping Device Status 9
Figure 12: The Web Configuration Tab 10
Figure 13: The Connect to…Window 11
Figure 14: The Web Manager Window 11
Figure 15: Network Settings Window 12
Figure 16: Hostlist Settings Window 13
Figure 17: Connection Settings Window 14
Figure 18: Serial Connection Settings Window 15
Figure 19: Lantronix CPR Welcome Window 17
Figure 20: Select Installation Folder Window 18
Figure 21: Confirm Installation Window 18
Figure 22: Security Confirmation Window 19
Figure 23: Installation Complete Window 20
Figure 24: Com Port Redirector Main Window 22
Figure 25: Com Ports Window 22
Figure 26: Com Ports Window Showing New Port 23
Figure 27: Devices Found on the Network 23
Figure 28: Highlighting a Com Port 24
Figure 29: Assigning a Device to a Com Port 25
Figure 30: Device Added to Com Port 25