Figure 5: selecting the assignment method, Figure 6: fill in ip settings – Kramer Electronics VP-725N User Manual
Page 8
Advertising
6
Installing and Running DeviceInstaller™
Note: The Web Configuration option is recommended.
To change the IP address:
1. Select the device from the list (see
), then click the Assign IP button
or select Assign IP Address from the Device menu.
2. Select the assignment method and click Next.
Figure 5: Selecting the Assignment Method
3. Fill-in the IP address, Subnet mask and Default gateway to assign to the
device and click Next.
Figure 6: Fill in IP Settings
Advertising