Kramer Electronics VP-730 - Manual (Page 29)

24 VP-730 - Configuring the VP-730 via the OSD MENU Screens
7.2 The Picture Screen
The Brightness, Contrast, Color and Hue picture settings are saved individually for
each input (except USB).
Figure 15: Picture Screen
Setting Function Default
Brightness Adjust the brightness: 0 to 100 50
Contrast Adjust the contrast: 0 to 100 50
Color Adjust the color: 0 to 100 55
Hue Adjust the hue: 0 to 360 180
Sharpness Adjust the sharpness: 0 to 100 50
Output Gamma Adjust the gamma: Gamma 1 to Gamma 5 Gamma 1
Film Mode Set the film mode: Auto, Video, Film Auto
Temporal NR Set the temporal noise reduction level: Off,
Low, Medium, High
High
Mosquito NR Set the Mosquito noise reduction level: Off,
Low, Medium, High
Low
Block NR Set the block noise reduction level: Off, On Off
Detail Enhancement Set the detail enhancement: Off, Low,
Medium, High
If the USB input is selected, Detail
Enhancement is set to Off
Medium
Luma Transition Enhance Set the luminance transition enhance level:
Off, Low, High
Low
Chroma Transition Enhance Set the chrominance transition enhance level:
Off, Low, High
Low