Kramer Electronics VP-730 - Manual (Page 41)

36 VP-730 - Configuring the VP-730 via the OSD MENU Screens
7.8.4 The Output Functions Screen
Figure 24: Output Functions
Setting Function Default
Custom Output Custom 1 to Custom 4
HT Horizontal total 1344
HW Horizontal sync pulse width 136
HS Horizontal active start point 296
HA Horizontal active region 1024
HP Horizontal polarity
VT Vertical total 806
VW Vertical sync pulse width 6
VS Vertical active start point 35
VA Vertical active region 768
VP Vertical polarity
OCLK Output clock 65
Apply Press to apply the settings
Save Save setup
Set Current Import the values of the currently selected output
resolution into the User Mode Setting
N/A
Read EDID Reads the EDID file from the acceptor that is
connected to the HDMI output. The EDID is
stored as a custom output resolution.
This allows automatic handling of LED screens
that support very low non-standard resolutions