Kramer Electronics VP-730 - Manual (Page 37)

32 VP-730 - Configuring the VP-730 via the OSD MENU Screens
7.8 The Advanced Setup Screen
Figure 21: Advanced Setup Screen
The Mode Set functions define the desired working resolution and refresh rate
when the system cannot distinguish between similar resolutions (for example,
resolutions that have the same number of lines can be defined to identify refresh
rate values.
Setting Function Selection/Range Default
Mode 1 Set mode 1 1400x1050x60Hz
1680x1050x60Hz
1400x1050x60Hz
Mode 2 Set mode 2 1280x1024x75Hz
1280x1024x76Hz
1280x1024x75Hz
Mode 3 Set mode 3 1280x768x60Hz
1366x768x60Hz
1280x768x60Hz
If two resolutions have the same number of lines (for example, 1050), we can
define them so that the unit identifies them as 1400x1050 or as 1680x1050.
7.8.1 The OSD Screen Functions
Setting Function Selection/Range Default
Menu Position Set the location of the
OSD menu
Center, Top Left, Top Right,
Bottom Left, Bottom Right
Center
Time Out (sec) Set the OSD menu timeout 5, 10, 20, 30, 60, 90 or Off 30