7 operating your audio-video matrix switcher, 1 startup display, 2 using the front panel buttons – Kramer Electronics VS-162AVRCA User Manual
Page 24: Operating your audio-video matrix switcher, Startup display, Using the front panel buttons, Figure 15: default startup status display sequence
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Audio-Video Matrix Switcher
20
7 Operating Your Audio-Video Matrix Switcher
Operate your unit via:
•
The front panel buttons (as this section describes)
•
RS-232 or RS-485 serial commands transmitted by a touch screen
system, PC
•
Kramer RC-IR1 Infra-Red Remote Control Transmitter
, or other serial controller
•
Dry contact-closure switches connected to the Keyboard Extension
7.1 Startup Display
After switching on the power, the MATRIX and STATUS
following screen:
Figure 15: Default Startup Status Display Sequence
7.2 Using the Front Panel Buttons
You can switch video/audio signals in the BREAKAWAY or
AUDIO-FOLLOW-VIDEO modes (see section 7.2.1), and you can work in the
AT ONCE or CONFIRM modes (see section 7.2.2).
You can switch (see section 7.2.3) and clear (see section 7.2.4):
•
One input to one output
•
Several inputs to several outputs
•
One input to all outputs
1 For instructions on using Kramer Windows®-based Control Software, refer to the separate user manual (included on the
CD-ROM in .pdf format), Kramer Control Software
2 Previously known as the IR-1 / IR-1-01
3 Version 1.5 is shown in the Status Display as an example; text in the Matrix Display may vary (according to machine
settings)