Kramer Electronics VS-162AVRCA - Manual (Page 28)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Audio-Video Matrix Switcher
24
out # x
from in # y
Where x is the output number and y is the input number
3. Press the TAKE button to confirm the action.
The output switches to the input and the TAKE LED lights.
7.2.3.2 Switching several Inputs to several Outputs
In the AT ONCE mode, you need to execute each OUT-IN combination
separately (see section 7.2.3.1). When switching many inputs to many outputs
it is recommended to toggle to the CONFIRM mode.
In the CONFIRM mode you can key-in several actions and then confirm them
by pressing the TAKE button once (simultaneously switching several inputs
to several outputs).
To switch several inputs to several outputs in the CONFIRM mode (the
TAKE LED is lit), do the following:
1. Press the appropriate OUT button.
The MATRIX Display shows the 2 blinking digits, representing the
previous input number for that specific output 1
out # x
. If the previous input is
clear, the 2 blinking digits 00 appear in the MATRIX Display.
The STATUS Display shows the message:
Where x is the output number
2. Press the appropriate IN button.
The MATRIX Display shows the 2 blinking digits, representing the input
number and the TAKE LED blinks.
The STATUS Display shows 2
out # x
from in # y
the message:
Where x is the output number and y is the input number
3. Press the second appropriate OUT button, repeating step 1 above.
4. Press the appropriate
3
1 For example, pressing OUT button 9 shows the blinking digits 01 if input 1 was previously routed to OUT 9
IN button, repeating step 2 above.
2 Continuously, within the limit of the timeout (approximately 30 seconds)
3 That corresponds with the second OUT button