Kramer Electronics VS-162AVRCA - Manual (Page 43)

MENU Commands Sequence
39
39
what to INDICATE
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Use OUTkey to configure
1: scroll SETUP 2: AUDIO mode
Current:
AUDIO
3. Press the OUT button 1.
The TAKE LED blinks and the Displays show the messages:
Scroll switcher setup?
Press TAKE to execute
Current:
AUDIO
4. Press the TAKE button.
The Displays show the messages:
display mode
changed
Current:
SETUP
8.7 Choosing the COMMUNICATION Setting
Choose the response option (reply or no reply).
To choose the No Reply response option, for example, do the following:
1. Press the MENU button until you reach the COMMUNICATION setting.
The MATRIX Display shows the message:
COMMUNICATION setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX Display shows the message:
Use OUTkey to configure
1: REPLY 2: No Reply
3. Press the OUT button 2.
The TAKE LED blinks and the Displays show the messages:
Set serial port NO reply
Press TAKE to execute
Current:
Reply
4. Press the TAKE button again.
The Displays show the messages:
SWITCHER RESPONSE
changed
Current:
No reply