Kramer Electronics VS-88FO - Manual (Page 27)

24 VS-88FO - Operating the VS-88FO
2. Press the TAKE button to confirm all the actions.
The 7-segment display stops flashing. The TAKE button stays lit.
6.1.6 Storing an Input/Output Configuration
You can store up to 16 configurations in memory and recall them as presets using
the eight IN SELECT buttons and the eight OUT SELECT buttons.
To store the current configuration, do the following:
1. Press the STO button.
The STO button flashes.
2. Press one of the IN or OUT SELECT buttons.
The current configuration is stored in memory at the chosen preset number.
6.1.7 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button flashes.
2. Press the appropriate IN or OUT SELECT button (the button number
corresponds to the preset number).
The chosen preset configuration is restored from memory.
Note: Recalling an undefined setup gives an error indication ALL “0”.
6.1.8 Locking the Front Panel
Lock the front panel buttons to prevent unwanted key presses from changing the
existing setup.

To lock the front panel, press and hold the LOCK key for three seconds.
The LOCK key illuminates and the front panel keys are inactivated

To unlock the front panel, press and hold the illuminated LOCK key until the
light turns off. The front panel keys are activated