Kramer Electronics VS-88HD - Manual (Page 22)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-88HD
18
6.7.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VS-88HD to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
6.8 Configuring the Ethernet Port
To configure the Ethernet port, download the Device Properties Ethernet
configuration software. Extract the file to a folder and create a shortcut on
your desktop to the file.
Follow these steps to configure the port:
1. Double click the desktop icon.
The Connect screen appears as follows:
Figure 8: Connect Screen
2. Select the method to connect to the Ethernet port of the VS-88HD.
Select:
• Ethernet, if you know the IP address number
1
or the machine
name. The default name for the machine is
KRAMER_XXXX
2
• Serial, if you are connected via a serial port
1 The default IP address is 192.168.1.39
2 The four digits are the last four digits of the machine’s serial number.