Kramer Electronics VP-790 - Manual (Page 35)

30 VP-790 - Controlling the VP-790
7. Click OK.
Figure 14: Internet Protocol (TCP/IP) Properties Window
7.3.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VP-790 to the Ethernet port on a network
hub or network router, via a straight-through cable with RJ-45 connectors.
7.3.3 Operating Remotely via the Web Pages
To access the VP-790 Web pages:
1. Open your Internet browser.
2. Enter the IP address of the device (in the address bar of your browser (see
Figure 15 ).
Figure 15: Web Browser Address Bar