Kramer Electronics VP-790 - Manual (Page 42)

VP-790 - Firmware Upgrade 37
37
4. Plug in a USB cable between the VP-790 and the PC.
5. Using the VP-790 Updater Tool application, click Browse and select the
location of the desired BREC file to be programmed into the Unit.
6. Click Update Firmware.
When the VP-790 has finish ed programming you will see a “Firmware update complete”,
dialog box (this will take a minute or two).
7. After firmware update is complete, click OK.
8. Unplug the USB cable from the VP-790 unit.
9. Exit the VP-790 Updater application.
Do this only after disconnection,
10. Power cycle the VP-790 for the firmware update to take effect.
11. If you wish to restore the user settings go to Section 8.2