Kramer Electronics PL-50 - Manual (Page 22)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the PL-50 Power Controller - Monitor
18
6.3.4 The Channel Settings Screen
Figure 18 and Table 5 define the Channel Settings screen:
Figure 18: The Channel Settings Screen
Table 5: The Channel Settings Screen Features
Feature Function
Power Control: Set, for each channel whether it will be controlled manually (by the Panel screen
or the front panel buttons) or by the scheduler
In this example, channels 1, 2 and 5 are manually controlled, while channels 3
and 4 are controlled by the scheduler
Groups: Assign the channel to one of three groups only in the manual mode 1
Figure 18
.
For example, in Channel 1 and Channel 2 are assigned to group 1 and
will operate concurrently in the manual setting
In this example, channels 1 and 2 are assigned to group 1, so pressing one of
them will also activate the other
HELP BOX
In this page you can view and set the channels Power Control (Manual or
Schedule) you can also view and set Groups of channels to act together.
1 A channel that is scheduled overrides the group manual setting