Kramer Electronics PL-50 - Manual (Page 34)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Flash Memory Upgrade
30
8.1.3 Update the Firmware
To update the firmware, perform the following steps:
1. Open the K-UPLOAD software
1 by double-clicking the desktop icon
K-UPLOAD. The K-UPLOAD screen appears 2 :
Figure 30: K-UPLOAD Screen
2. Click the Connect button.
The Connect Window appears (see Figure 31 ).
Figure 31: Connect Ethernet by IP Number
1 You can download and install the latest version of K-UPLOAD from http://www.kramerelectronics.com .
2 The screens appearing in this manual are examples of the process. The actual screens may differ in their content.