Kramer Electronics PL-50 - Manual (Page 27)

Connecting the PL-50 Power Controller - Monitor
23
In the example illustrated in Figure 23 , the Power OFF Order is set from
5 to 1 with a 10 second delay time before each channel in the sequence is
switched OFF:
Figure 23: Power ON Order Example
The system switches ON according to the Power ON Order, with a 1 second
delay before powering ON each channel:
1sec
Delay
1sec
Delay
1sec
Delay
1sec
Delay
Power ON
Channel 5
Power ON
Channel 3
Power ON
Channel 1
Power ON
Channel 2
Power ON
Channel 4
Figure 24: Switching ON Sequence Example
If an outlet is not connected, the sequence skips over that channel (and its
switching delay time as well) and continues to the next channel in the
sequence.
HELP BOX
This page lets you set the power ON and OFF order and delay.