Kramer Electronics PL-50 - Manual (Page 48)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer Protocol 3000
44
ALARM-OFF
Cmd Short Description Command Type Permission
Set alarm OFF PL-50 User
Usage:
Syntax Response
ALARM-OFF ALARM-OFF RESULT
ALARM-ON
Cmd Short Description Command Type Permission
Set alarm ON PL-50 User
Usage:
Syntax Response
ALARM-ON ALARM-ON RESULT
ALARM-ON?
Cmd Short Description Command Type Permission
Query alarm status PL-50 User
Usage:
Syntax Response
ALARM-ON? ALARM-ON 1/0
1/0= On OR Off
ALARM-START-AS
Cmd Short Description Command Type Permission
Set alarm Relay mode start PL-50 Administrator
Usage:
Syntax Response
ALARM-START-AS 1/0 ALARM-START-AS 1/0 RESULT
1/0= Open/Close
ALARM-START-AS?
Cmd Short Description Command Type Permission
Query alarm Relay mode start. PL-50 User
Usage:
Syntax Response
ALARM-START-AS? ALARM-START-AS 1/0
1/0= Open/Close
ALERT-REG
Cmd Short Description Command Type Permission
Alert Registration PL-50 Administrator
Usage:
Syntax Response
ALERT-REG? CHNL ALERT-REG? CHNL ,EVENT ,ACTION
CHNL = (1-5)
EVENT = (TO_OFF,TO_ON,TO_FULL,TO_STBY,TO_NONE,ANY_CHANGE)
ACTION = (NO_ALERT,ALARM, ALL_ALERTS)