Kramer Electronics SP-12HD - Manual (Page 21)

Communication Protocol
19
19
Switch Number Description Switch Value Description
23 TEST 0 - 7 Read only - switch controlled
0 - Test off (default)
1 - Color bars 100%
2 - Y-sweep
3 - Pulse 2T and bar
4 - Ramp 100%
5 - C-sweep
6 - Split bars 100%
7 - Grid
24 ACTIV_AUTO_STAND status of
standard auto-identification, read only
0 - 19 In case of forced input standard
value "E" corresponds to this
standard. In both cases (auto or
forced) the coding differs from
parameter D=1
(input_stand_YUV/SDI) and is
following:
0 – 720p/60 10- 1080p/23.9
1 – 720p/59.9 11- 1080psf/30
2 – 720p50 12- 1080psf29.9
3 - 1080i/60 13- 1080psf/25
4 - 1080i/59.9 14- 1080psf/24
5 - 1080i/50 15- 1080psf/23.9
6 - 1080p/30 16- 480p/60
7 - 1080p/29.9 17- 576p/50
8 - 1080p/25 18- 480i/60
9 - 1080p/24 19- 576i/50