Kramer Electronics SP-12HD - Manual (Page 5)

Overview
3
3
3 Overview
The Kramer SP-12HD is a multi-standard/multi-format, broadcast-quality
video processor and ProcAmp. It is a universal single-box solution for all
your video processing requirements.
The SP-12HD HD-SDI Processor features the following:
• Inputs: composite video, s-Video, component video (YUV), SD/HD-SDI
• Outputs
1
• Input Video Standards: composite PAL-B, PAL-M, PAL-N,
NTSC-3.58, NTSC-4.43, SECAM; component (with auto
identification) 480i/60, 480p/60, 576i/50, 576p/50, 720p/50, 720p/60,
1080p/24, 1080p/25, 1080p/30, 1080i/50, 1080i/60, 1080psf/24,
1080psf/25, 1080psf/30
: composite video, s-Video, component video (YUV),
SD/HD-SDI (2 outputs), “Before/after” split-screen
• ProcAmp Functions: video gain, brightness, contrast, color, hue,
and sharpness (independent H and V). A full range of color control
features in both YUV and RGB color space
• Time Base Corrector
• 5-line super-adaptive 2D comb filter for CVBS decoding
• Individual H and V chroma-luma delay
In addition, the SP-12HD Digital Video Processor includes:
• 16 non-volatile memory setups available for saving the settings
• Power-down save
• A screen splitter that provides simultaneous "before and after"
image comparison on one monitor
• Full 10-bit digital processing throughout, for the highest possible
video quality
Control the SP-12HD:
• Using the front panel buttons and the 7-segment display
• Remotely, by RS-232 serial commands transmitted by a touch
screen system, PC, or other serial controller
1 All output formats are always available except where a format does not support the resolution in use. For example,
composite video and s-Video outputs are not available when an HD input (e.g. 1080p) is used