RADWAG BALANCES 3Y SERIES - Manual (Page 148)

- 148 -
27.5. Control start procedure
To start control:
•
a user with corresponding access level should be logged in.
Caution:
Logging procedure and access levels are described in chapter 8 – LOGGING.
•
Select appropriate product with correctly entered data, when the data is
entered in regard to control
•
Enter weighing mode parameters into balance memory,
Batch number – for identification of controlled products batch.
Batch quantity – software will control specified number of samples.
Average tare estimation – option for average tare estimation, number of
packaging needed for its estimation, more than 10.
•
Remove load from a weighing pan,