Getting started – RADWAG WPT/P 60 Postal Scales for Packages User Manual
Page 12
Advertising
• The surplus cable wind and place inside the
pillar as show below:
Put the indicator with the hendler on the
pillar and tighten up the handwheels:
6. GETTING STARTED
• After unpacking and mounting the scale level it out. Use levelling legs
and the level condition indicator installed in the basis of the scale.
• Turn the device on using the
key – keep pressing the key
for about 0.5 sec,
• Wait for the test completion,
- 12 -
Advertising
This manual is related to the following products: